一,、軸承安裝不當　　
安裝時使用蠻力,，用錘子直接敲擊軸承對軸承傷害最大,，是造成變形的主要原因,。安裝不到位,，安裝有偏差或未裝到軸承位,，造成軸承游隙過小,。內外圈不處于同一旋轉中心,，造成不同心,。選擇適當?shù)幕驅I(yè)的軸承安裝工具，安裝完畢要用專用儀器檢測,。
When installed using brute force, direct hit with a hammer bearing on bearing the greatest harm, is the main cause deformation. Installation is not in place, install a deviation or mounted to the bearing position, causing the bearing clearance is too small. Inner and outer rings are not in the same center of rotation, resulting in different heart. Select the appropriate or professional bearing installation tool installed to use special instruments to detect.   
二,、升降平臺軸承潤滑不良
據調查，潤滑不良是造成軸承過早損壞的主要原因之一,。未及時加注潤滑劑或潤滑油,；潤滑劑或潤滑油未加注到位；潤滑劑或潤滑油選型不當,；潤滑方式不正確等,。選擇正確的潤滑劑或潤滑油，使用正確的潤滑加注方式,。
According to the survey, poor lubrication is one of the main causes of premature bearing damage. Not timely filling lubricant or lubricants; lubricants or lubricants are not filling in place;improper lubricant or lubricant selection; incorrect lubrication and so on. Choosing the right lubricant or lubricants, lubricant filling the correct way. 
三,、升降平臺軸承受到污染
污染也會導致軸承過早損壞，污染是指有沙塵,、金屬屑等進入軸承內部,。主要原因包括：使用前過早打開軸承包裝,，造成污染；安裝時工作環境不清潔,，造成污染,；軸承的工作環境不清潔，工作介質污染等,。在使用前最好不要拆開軸承的包裝,；安裝時保持安裝環境的清潔，對要使用的軸承進行清洗,；增強軸承的密封裝置,。
Pollution can also cause premature bearing damage, pollution refers to dust, metal shavings from entering the bearing. Main reasons include: premature opening bearing packaging before use, cause pollution; installation dirty work environment, causing pollution; bearing dirty work environment, the working medium pollution. Do not open before using the best packaging bearing; keep the environment clean install when installing the bearing to be used for cleaning; enhanced seal bearing.  
四、升降平臺軸承工作疲勞
疲勞破壞是軸承常見的損壞方式,，軸承長期超負荷運行,；未及時維修；維修不當,；設備老化等,，選擇適當?shù)妮S承類型，定期及時更換疲勞軸承,。
Bearing fatigue failure is a common way of damage. Bearing long-term overload operation; not timely maintenance; improper maintenance; equipment aging, select the appropriate bearing type, regular and timely replacement of fatigue bearings.