熱門關鍵詞: 液壓升降平臺 導軌式升降機 移動式升降平臺 固定式升降機 鋁合金升降平臺
1,、軸承過熱,產生的原因是缺油,,油中含雜質,,油孔堵塞;接觸不良或軸線不同心,;間隙過?。挥腿D(zhuǎn)動不靈或卡住,。這時應該清洗,、加油或換油,通油孔,;調整,;加墊或刮研;調整或更換油圈,。
Bearing overheating causes are lack of oil, oil containing impurities, hole blockage; bad or different from the central axis; gap is too small; Oil circle rotation not working or stuck. At this point should be cleaned, fuel or oil change, through hole; adjustment; padded or scraping; adjust or replace the oil ring.
2,、升降平臺滾筒輪毅松動,產生的原因是局部受力過大,,連接件松動或斷裂,,處理的方法是緊固或更換連接件。
Yi loose roller wheel lifting platform, causes localized force is too large, loose connections or broken. Treatment methods are tightening or replacing connectors.
3,、升降平臺滾筒有異聲,,產生的原因是連接桿件松動或斷裂,產生相對位移和振動,;焊縫開裂;筒殼強度不夠,,產生變形,;襯套與軸徑磨損,間隙過大,;聯軸器松動,。處理的方法是緊固或更換、補焊,、筒內補焊加強筋,;換襯套,加強筋潤滑,;緊固或更換損壞零件,。
Lifting platform drum has a different sound, the cause is loose or broken connecting rod, the relative displacement and vibration; weld cracking; tube shell strong enough to produce distortion;bushing and shaft wear, the gap is too large; couplings loose. Treatment methods are tightened or replaced, welding, tube welding ribs; changing bushings, ribs lubrication; tighten or replace damaged parts.
咨詢熱線
189-0831-8192